The Axon Bioscan
Where Physics meets Biology
What Is the Bionetics BioScan?
The Bionetics BioScan is a quick, precise bioresonance scan. It uses physics in the form of specific electrical frequencies, called signatures, to communicate with the body. It’s not technically classified as biofeedback or neurofeedback, but the concept is similar. The device measures your body’s galvanic skin response, tiny shifts in the skin’s electrical conductivity, as it reacts to each signature. That response generates a report with thousands of data points on the subtle stressors that are influencing the way your body functions, often before they show up anywhere else. This level of individualized precision is oftentimes the difference between BREAKTHROUGH and remaining STUCK in a cyclical pattern of symptoms.
The Scan Process
Step 1: Gather Feedback
On the day of your scan, you'll remove anything electronic or magnetic. You'll lie back on the treatment table holding the calibration sensor in your right hand, with electrodes on your right foot and left hand. The device will run through more than twenty categories (minerals, hormones, toxins, etc.) across eight channels of electrical current. We'll also collect a quick cheek swab to individualize your dataset. The whole process takes about eight to ten minutes, and you won't feel a thing beyond an occasional slight vibration in your hand. No needles, no pain, just data.
Years of treatments, still no answers. Get the clarity you’ve been longing for.
One 10 minute scan, 60 pages of data. When interpreted carefully, the data tells us a story, one that will reveal exactly how & why you’ve felt stuck - desperately seeking answers that nobody has been able to answer. In order to get different results, you need to do things differently - which is exactly why you should get scanned. You’ve “done it all” but you haven’t done this.
Categories
Organs & Glands | Lymphatics | Gastrointestinal | HPA/HPT Axis | Environmental Stressors | Physiology | Metabolism | Hormones | Minerals
Cell Salts | Enzymes | Grains | Dairy | Chemical Toxins | Heavy Metals | Bacteria | Virus | Mold | Yeast/Fungus | Parasites | Immune | Lyme
Step 2: Data Review
After your scan, your report is processed and the data analyzed before we sit down together. In that meeting, we walk through your results page by page, across sixty pages spanning more than twenty categories: organ systems, the lymphatic system, environmental toxins, minerals, heavy metals, enzymes, parasites, and neuro-emotional signatures, among others.
Rather than chasing single data points, we look for clearly established trends: the same pattern showing up again and again across multiple pages. Those trends point to your high priority imbalances, the areas where your body is asking for the most support right now. We build this picture together through teaching, dialogue, and “whiteboarding.”, This is the most insightful part of the visit. From there, your individualized remedy protocol is put together based on those high priority imbalances.
Step 3: Protocol Building
At the end of your data review, the optimal remedy protocol for your unique dataset is presented, with every remedy explained. If you're on medications, that's always factored in carefully. Protocols at Axon draw from homeopathics, herbal tinctures, supplements, minerals, and cell salts, among others. The average Axon protocol runs four to six remedies, a welcome change for many clients coming from a previous provider who had them on ten or more supplements at once. You'll leave with a BioScan synopsis listing each of your high priority imbalances, plus a product list with details on every remedy and specific dosage instructions.
Step 4: Follow-Up
At the end of your BioScan review, we put together a game plan, choosing the path forward that gives us the time and resources needed to get the best outcomes. Before you leave, we schedule your first follow-up appointment, typically four to six weeks out, for sixty minutes. That first follow-up matters a lot to your case. It’s where I get real feedback from you on how you’re responding to your phase one protocol. During that visit, we run additional assessments, electrodermal point testing or kinesiology-based reflex testing, to build on your original BioScan dataset and get a clearer picture of what your body is responding to. From there, we reassess, reevaluate, and rebuild your protocol for phase two.
HOW OFTEN DO I NEED TO SCAN?
There’s enough data in one scan to last upwards of six months, and many clients reach their desired outcomes before ever needing a second one. That said, it’s common for clients to rescan every four to six months if new datasets are warranted.
Investment
$500
BioScan & Data Review
Your two and a half hour visit includes the full scan, a complete walkthrough of your results, and your initial remedy protocol. Remedy price is personalized to your protocol and reviewed with you at your visit.
The Most Common Questions
-
Every cell in your body carries a small electrical charge, and that charge shifts slightly whenever your body reacts to something, whether it’s a virus, a nutrient, a food, or a toxin. Bioresonance scanning picks up on those shifts in real time, giving us a broad, individualized dataset most people never get access to. It’s a unique, emerging technology, and I use it to support your body’s own ability to heal, built around a picture that’s specific to you rather than a generic plan. The SpectraVision® d evice has not been approved by the U.S. FDA as a medical device and is not intended to diagnose, treat, cure, mitigate, or prevent any disease or medical condition. This information is for informational and educational purposes only.
-
The BioScan uses a device called the SpectraVision to send your body a series of frequency signatures, over 10,000 of them, spanning bacteria, fungus, viruses, toxins, vitamins, minerals, and herbs, and reads your electrical response to each one. It runs through 144 of these readings every two seconds, then maps which areas of your body are showing the strongest reactions, so we know where to focus first. From there, the same device tests how you respond to specific remedies, which is how I narrow down what actually belongs in your protocol instead of guessing.
-
The BioScan is built on technology that reads your body's response down to the cellular level, something most assessment tools simply aren't designed to capture. In a single session, it generates over sixty pages of data across more than twenty categories: organ systems, toxins, minerals, enzymes, and more. That depth of information is what allows us to build a program and remedy protocol around your body specifically, rather than starting from a generic template and adjusting as we go. It's a level of individualization most people never get access to.
-
Not at all. You simply hold a small probe during the scan, and there's no sensation involved, no needles, no discomfort. Most clients are surprised by how effortless the whole process feels, especially given how much information it gathers.
-
Absolutely, and we have run many scans for children as young as 6 months. The primary contraindications are for individuals who are:
Pregnant
A recipient of an organ transplant
Have a pacemaker
-
Yes, and the two work well together. The BioScan is not a replacement for labwork or medical care, and it’s not designed or intended to diagnose or treat any condition. What it does is look at broader patterns across your body that standard labs aren’t built to capture. I often use both together: your labwork gives us confirmed medical data, and the scan adds a layer of insight around it so we have a fuller picture to build your protocol from.
-
There’s enough data in one scan to last upwards of six months, and many clients reach their desired outcomes before ever needing a second one. That said, it’s common for clients to rescan every four to six months if new datasets are warranted.
-
The scan itself takes about ten minutes. From there, it takes roughly an hour to analyze the data and generate your complete report.
-
Yes. A remedy protocol recommendation is always included as part of your scan and data review, but there’s no obligation to start it. I also work closely with a number of other practitioners who use the BioScan data as part of their own care for a client, so the report itself has value beyond just building a protocol with me.
-
Every device and provider is different, so it’s a fair question. The SpectraVision technology I use runs eight channels of electrical current simultaneously, confirming a response eight separate times before it’s counted, where many devices only run one or a few channels. That gives us a level of accuracy and specificity most scans simply can’t match. It’s also a significant investment to bring into a practice, and integrating it required two years of certification training as a Bionetic Naturopathic Counselor. You’re not left to interpret your results on your own. I walk you through the raw dataset, explain what each priority means, and then build a protocol.
-
Yes. Remote scanning is available for clients who aren’t able to come in person. We mail out a DNA collection kit and walk you through submitting a hair and saliva sample. The most complete results come from scanning someone live, but we’re still able to generate an impressively accurate dataset from DNA samples alone.
-
Your BioScan and Data Review is $500 for a two and a half hour visit. Remedy protocols are priced individually based on what’s recommended for you, and reviewed together at your visit. You can see full pricing details above in the Investment section.